Keeping the surface clean
It is important to keep your wet-pour surface clean, this can be easily done by sweeping the surface annually, sweeping off flowers, leaves and other detritus that may fall on the safety surface. This must be done before they form a mush that can be trodden into the surface; if it is left to rot and form a skin it can stop the surface from draining. Cleaning the surface with a weak solution of washing-up-liquid using a pressure washer or jet wash can help keep it draining and maintain the slip-resistance.
Stain Removal
Most stains can be removed with a weak solution of washing-up-liquid and water. This is safe to put on the service, always make sure it is washed off to maintain the slip-resistance.
Snow and Ice
Snow and ice are not harmful to the surface, brushes can be used to brush off the snow, but chemical agents should NOT be used on the wet pour safety surfacing.
Sharp Objects
Keep sharp objects away from the surface as this is not covered under your guarantee, any high healed shoes or chairs that could dig into the surface can cause holes and damage to the wet pour surfacing.
Wet pour Safety Surfacing Repairs
Soft Play Safety Surfacing offer a wet pour repair service please see our website for details at www.softplaysurfaces.com
Wet pour Safety Surfacing Repair Kits
If you prefer to repair the wet pour area yourself, we offer ‘Wet pour Safety Surfacing Repairs Kits’ These can be used to repair small areas and come with full instructions. Details and pricing of our wet pour repair kits here www.softplaysurfaces.com/wet_pour_repair_kits.html
Please call us if you are unsure about any wet pour maintenance on 0161 973 0010. See our website for more safety surfacing products and service at www.softplaysurfaces.com
No comments:
Post a Comment